TPL Industrial Private Limited

synthetic gear oil has been developed for the lubrication of heavily loaded gears, bushings and bearings which may operate over a broad range of temperatures from ambient to elevated temperatures up to 160 °C and for up to 200 °C for short periods.

Castrol Alpha Sp 220 Gear Oil

Description:

The Castrol Alpha™ SP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with an extreme pressure additive technology providing good thermal stability and high load carrying capacity. The extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.

Application:

The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is compatible with the most common types of seal materials.

Advantages:

Extreme Pressure (EP) performance protect gears against wear and shock-loading as measured by FZG performance and demonstrated extensively in the field. Alpha SP ‘Clean gear’ additive technology provides low deposit formation Good water separation and demulsification High protection against corrosion and wear.

Product Performance Claims:

Specific grades within the Alpha SP range meet the requirements of:

• DIN 51517 Part 3
• AGMA 9005 - E02
• AIST 224
• David Brown S1.53.101 Type E
• SIEMENS MD Rev 13 for Flender Gear Units (ISO VG 150 - 680)

Protomac Sp 320 Balmerol Gear Oil

BALMEROL PROTOMAC SP series is recommended for lubrication of all types of circulation, spray, and splashor dipbathlubrication mechanisms. For achieving best performance, BALMEROL PROTOMAC SP series is recommendedtobeusedup to 110 oC. BALMEROL PROTOMAC SP series are recommended for use in all conventional types of gears, slidingmechanisms, chain drives and flexible couplings, as also for use in mechanisms operating under heavy/shockloadsandvibrations. BALMEROL PROTOMAC SP series can be filtered or centrifuged without the loss of additives andarethussuit-able for use in continuous recirculation systems incorporating filters. BALMEROL PROTOMAC SP series is availableineightstandard ISO Viscosity grades

Agip Blasia XMP 460 is a high-performance, extreme pressure (EP) gear oil designed for enclosed gear systems operating under severe conditions, such as high loads, high speeds, and high temperatures

Shell Spirax S2 G 90 (P 201) is a high-quality automotive gear oil designed to provide reliable protection and smooth operation of manual transmissions and axle systems. Formulated with high-quality mineral base oils and advanced additives, it ensures excellent wear protection and oxidation stability under demanding conditions.

HP Parthan EP 680 is an industrial extreme-pressure (EP) gear oil designed for heavy-duty enclosed gear drives

HP Parthan EP 460 is a mineral gear oil designed for heavy-duty industrial applications, such as enclosed gear drives and bearings under shock and heavy loads

HP Parthan EP 150 is a premium industrial gear oil designed for heavy-duty enclosed gear drives, offering enhanced protection under extreme pressure and shock load conditions. It is formulated with high-quality base stocks and fortified with extreme pressure (EP) additives, antioxidants, and anti-foam agents, providing excellent load-carrying capacity, thermal stability, and resistance to oxidation

The eni RGB series has been developed to meet the widest range of requirements of EP
(Extreme Pressure) lubrication, such as, for instance, gears operating under severe duty (ISO-
L-CKD classification).
The oils are formulated from paraffinic base stocks and additives such as sulphur compounds
(which ensure good high-speed and shock-load performance) and phosphorus compounds
(for low-speed and high-load performance).

Castrol Alpha SP 680 Gear Oil 

Description:

The Castrol Alpha™ SP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with an extreme pressure additive technology providing good thermal stability and high load carrying capacity. The extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.

Application:

The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is compatible with the most common types of seal materials.

Advantages:

Extreme Pressure (EP) performance protect gears against wear and shock-loading as measured by FZG performance and demonstrated extensively in the field. Alpha SP ‘Clean gear’ additive technology provides low deposit formation Good water separation and demulsification High protection against corrosion and wear.

Product Performance Claims:

Specific grades within the Alpha SP range meet the requirements of:

• DIN 51517 Part 3
• AGMA 9005 - E02
• AIST 224
• David Brown S1.53.101 Type E
• SIEMENS MD Rev 13 for Flender Gear Units (ISO VG 150 - 680)

Gulf 140 refers to a type of heavy-duty gear oil, such as Gulf Gear MT 85W-140 or Gulf Glide Axle Oil 85W-140, designed for applications with extreme pressures and shock loads, like the axles and transmissions of heavy commercial vehicles. The "140" in the name indicates a high viscosity, meaning it is a thick oil that provides excellent lubrication and protection in demanding conditions, while the "85W" in multigrade versions specifies its performance in cold temperatures. 

Gear Oil 140 is a high-quality extreme pressure (EP) lubricant specially formulated for heavy-duty gear systems. It provides excellent protection against wear, rust, and corrosion, ensuring smooth transmission performance even under high loads and temperatures.

Balmerol HP 90 &140 are superior performance automotive gear oils formulated from high quality basestocks and selective additive system. Balmerol HP 90 &140 oils are formulated for automotive transmissions, axles, final drives; having selective Extreme Pressure (EP) additives which provide protection against wear, scoring and also exhibits excellent oxidation stability, long service life. Balmerol HP 90 &140 oils meet the following specifications: • API service classification GL- 4 • IS : 1118 – 1992 - Reaffirmed 2001 • US Military MIL-L-2105 • UK Defence CS 3000A

Balmerol HP 80W-90 is a multi-purpose, heavy-duty gear oil designed for gearboxes and rear axles, meeting API GL-4 and US Military MIL-L-2105B specifications

Balmerol Protomac Sp 320 Gear Oil

Balmerol Protomac SP Series are premium quality all purpose industrial gear oils. Balmerol Protomac SP Series oils are blended from carefully selected paraffinic basestocks and combination of synergistic additives to achieve the required performance level of different standards as well as compatibility with normal seal materials. Balmerol Protomac SP Series oils can be filtered or centrifuged without the loss of additives.

Alpha SP 68Mineral gear oil

The Castrol Alpha™ SP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with an extreme pressure additive technology providing good thermal stability and high load carrying capacity. The extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.

Application:

The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is compatible with the most common types of seal materials.

Advantages:

Extreme Pressure (EP) performance protect gears against wear and shock-loading as measured by FZG performance and demonstrated extensively in the field. Alpha SP ‘Clean gear’ additive technology provides low deposit formation Good water separation and demulsification High protection against corrosion and wear.

Product Performance Claims:

Specific grades within the Alpha SP range meet the requirements of:

• DIN 51517 Part 3
• AGMA 9005 - E02
• AIST 224
• David Brown S1.53.101 Type E
• SIEMENS MD Rev 13 for Flender Gear Units (ISO VG 150 - 680)

Alpha SP is classified as follows: DIN Classification is CLP